两个由2,3,5-吡啶三酸构筑的三维网状配位聚合物的合成、晶体结构和性质研究

2,3,5-吡啶三酸在水热条件下分别与Mn(CH3COO)2·4H2O和Co(CH3COO)2·4H2O反应,得到了2种金属有机骨架(MOFs)配合物[Mn1.5(2,3,5-pta)(H2O)4]n(1)和[Co1.5(2,3,5-pta)(H2O)4]n(2),其中2,3,5-H3pta=2,3,5-吡啶三酸。利用元素分析、红外、热重和X-射线单晶衍射分析进行了表征。分析结果表明2个配合物属于同构晶体:晶系为单斜,空间群为P21/c,其中,吡啶三酸配体完全脱去3个质子,并分别与4个六配位的金属离子相连,在空间形成一种三维网络状结构。热重分析表明,配合物1的稳定性要高于配合物2。     

Synthesis and Insecticidal Evaluation of Novel Phthalic Diamides Containing 1,2,3‐Triazoles via Click Reaction

A series of novel phthalic diamide derivatives containing 1,2,3‐triazole moiety were synthesized using one‐pot click chemistry approach and characterized by ¹H NMR and HRMS. The insecticidal activity against armyworm (Mythimna separata), Tetranychu scinnabarinus and cowpea aphid (Aphis craccivora) was evaluated. Compounds 4II‐a and 4II‐i showed 50% insecticidal activity against armyworm (Mythimna separata) at the concentration of 4 mg/L and one‐third of the compounds had moderate activity against Tetranychus cinnabarinus at 500 mg/L.     

三有机锡(4R)-3-[[(2S)-5-氧-2-吡咯烷基]羰基]-4-噻唑烷甲酸酯的合成、结构和体外抗癌活性

利用三有机锡氢氧化物和手性配体(4R)-3-[[(2S)-5-氧-2-吡咯烷基]羰基]-4-噻唑烷甲酸(HL)反应合成了3个三有机锡(4R)-3-[[(2S)-5-氧-2-吡咯烷基]羰基]-4-噻唑烷甲酸酯R3SnL[1,R=c-C6H11(a),C6H5(b),C6H5C(CH3)2CH2(c)],通过元素分析、IR、1H NMR和X-射线单晶衍射表征了其结构。化合物1a属正交晶系,P212121空间群;化合物1b属单斜晶系,P21空间群。二者均为由羧基氧和内酰胺羰基氧桥联配位形成的右螺旋链状有机锡配位聚合物,锡原子具有五配位[SnC3O2]畸变三角双锥构型。化合物1a和1b对体外2种人癌细胞Colo205和Bcap37增殖均有强的抑制作用,其活性为1b1a。     

3-氨基丙醇调控合成超顺磁四氧化三铁微球

采用乙二醇为溶剂,无水FeCl3为铁源,聚丙烯酸为稳定剂,通过改变3-氨基丙醇的用量,合成了一系列不同微球直径和晶粒大小的超顺磁Fe3O4微球。高分辨率透射电镜和X-射线衍射分析证实所得产物为Fe3O4,红外光谱和热重分析表明,微球表面成功包覆聚丙烯酸。微球的大小和组成微球的颗粒粒径分别用透射电镜和X-射线衍射分析,结果表明,所得微球的直径随着3-氨基丙醇的用量增加而减小,组成微球的颗粒粒径随着3-氨基丙醇的用量增加而增大。磁性测试表明所制备微球室温下具有良好的超顺磁性。该制备方法步骤简单,可望用于其他无机氧化物纳米微球或颗粒的制备。     

磁性Fe_3O_4@SiO_2@ZrO_2对水中磷酸盐的吸附研究

合成了以Fe3O4为核,以SiO2为壳的磁性纳米微粒(Fe3O4@Si O2),并采用沉淀沉积法将ZrO2包覆到材料表面。通过XRD、TEM、VSM、ζ电位、XPS和N2吸附/脱附等手段对材料进行表征,结果表明材料Fe3O4@SiO2@ZrO2上沉积了氧化锆纳米颗粒,具有超顺磁性,可在外加磁场作用下实现从水中快速分离。同时系统研究了材料对水中磷酸盐的吸附行为,结果表明沉积Zr O2使得材料对磷酸盐表现出良好的吸附性能,并且随着沉积量的增大吸附量增加。吸附等温线符合Freundlich方程。吸附动力学可用拟二级动力学模型描述,吸附速率随磷酸盐初始浓度增加而减小。磷酸盐吸附量随溶液p H值的增大而减小,但几乎不受离子强度影响。     

2-羰基丙酸(芳甲酰基)腙二(2,4-二氯苄基)锡配合物的合成、晶体结构、热稳定性及与DNA相互作用研究

在含水甲苯中,2,4-二氯苄与锡粉反应合成了二(2,4-二氯苄基)二氯化锡,将其分别与2-羰基丙酸(苯甲酰基)腙及2-羰基丙酸(水杨酰基)腙反应,合成了2个取代苄基锡配合物(C2、C3),配合物C2和C3通过元素分析、1H NMR、13C NMR、IR、UV-Vis等表征,运用X-射线单晶衍射测试了2个有机锡配合物的分子结构,结构分析表明,锡与配位原子形成变形五角双锥构型的双核有机锡配合物,分子以Sn2O2四元环为中心对称。热分析结果表明,在空气氛下,配合物C2在121℃、C3在128℃以下可稳定存在;在Tris-HCl缓冲溶液中,以EB做为荧光探针,用荧光光谱法初步研究了配合物与鲱鱼精DNA的相互作用,结果表明配合物与鲱鱼精DNA作用是插入结合与静电结合共同作用所致。     

用复合调节剂合成异戊二烯-苯乙烯共聚物的反应动力学

以正丁基锂为引发剂,环己烷为溶剂,十二烷基苯磺酸钠/四氢呋喃(SDBS/THF)为复合调节剂,采用负离子溶液聚合法制备了异戊二烯-苯乙烯共聚物,考察了反应温度,复合调节剂用量对聚合反应的影响,研究了聚合反应动力学,求取了聚合反应的表观反应速率常数kp",通过Arrehenius方程求得了不同反应条件下的聚合反应活化能,并对聚合物的微观结构进行了研究,结果表明,十二烷基苯磺酸钠/四氢呋喃(SDBS/THF)复合调节剂对合成异戊二烯-苯乙烯共聚物是有效的微观结构调节剂。     

全印刷工艺制备聚合物OLED显示屏

详细探讨采用全印刷工艺,制备聚合物OLED显示屏的工艺流程和技术难点的克服。通过喷墨打印纳米银电子墨水制备金属阴极,完全避免了高温及真空工艺的使用。在显示屏制备过程中,我们成功研发由水/醇溶性共轭聚合物聚[9,9-二辛基芴-9,9-双(N,N-二甲基胺丙基)芴],与一种可固化的环氧树脂粘合剂共混形成的多功能缓冲层。此多功能缓冲层,一方面保护有机功能层,避免纳米阴电子墨水的侵蚀,另一方面提供必需的电子注入功能,使高功函银阴极可以有效地注入电子。通过研究表面能优化打印阴极的成型形貌,并克服工艺难点,所制得的96×3×64分辨率的单色和全彩色聚合物OLED显示屏无坏点/坏线,红、绿、蓝电流效率分别为0.62、4.38、0.93cd/A,色坐标分别为(0.63,0.37)、(0.39,0.57)、(0.18,0.16)。     

A novel and facile synthesis of 2-oxo-1,2-dihydropyridine-fused 1,3-diazaheterocycles via heterocyclic ketene aminals and Konevenagel adducts formed by phthalic anhydride and ethyl cyanacetate

An efficient synthetic pathway to 2-oxo-1,2-dihydropyridine-fused 1,3-diaza heterocycles from heterocyclic ketene aminals,phathalic anhydride and ethyl cyanacetate was established.This protocol involved aza-ene reaction/imine-enamine tautomerization/enamine-ester exchange/ring-opening reaction sequence.     

Alkali metal cation doping of metal-organic framework for enhancing carbon dioxide adsorption capacity

Metal-organic frameworks （MOFs） have attracted much attention as adsorbents for the separation of CO2 from flue gas or natural gas. Here, a typical metal-organic framework HKUST-I（also named Cu-BTC or MOF-199） was chemically reduced by doping it with alkali metals （Li, Na and K） and they were further used to investigate their CO2 adsorption capacities. The structural information, surface chemistry and thermal behavior of the prepared adsorbent samples were characterized by X-ray powder diffraction （XRD）, thermo-gravimetric analysis （TGA） and nitrogen adsorption-desorption isotherm analysis. The results showed that the CO2 storage capacity of HKUST-1 doped with moderate quantities of Li＋, Na＋ and K＋, individually, was greater than that of unmodified HKUST-1. The highest CO2 adsorption uptake of 8.64 mmol/g was obtained with 1K-HKUST-1, and it was ca. 11% increase in adsorption capacity at 298 K and 18 bar as compared with HKUST- 1. Moreover, adsorption tests showed that HKUST-1 and 1K-HKUST-1 displayed much higher adsorption capacities of CO2 than those of N2. Finally, the adsorption/desorption cycle experiment revealed that the adsorption performance of 1K-HKUST-1 was fairly stable, without obvious deterioration in the adsorption capacity of CO2 after 10 cycles.